New to the DDoptics hunting range: FBT UNIC carbon grips for over 90 firearm models (Blaser, Tikka, Sauer, Mauser, Steyr, etc.). Now check the system

Structure Patent AT 523433 B1

The run is firing, but the FBT UNIC carbon shaft hits.

The FBT UNIC Carbonschaft combines ultra-light autoclave carbon with a patented 3D-printed carbon fiber core: approximately 630 g lightweight, 100% impact-resistant from -40 °C to +80 °C, and shotproof up to .338 Lapua Magnum.

Discover 7 technological advantages Weight and recoil calculator
Austrian patent AT 523433 B1
100% Made in Austria
For over 90 different weapons models

Key innovation · Patent AT 523433 B1

UNIC Carbonschaft | Three components, one unbreakable unit.

1. Autoclave front and rear casing (CFK)

Baked from prepreg carbon fiber fabric in an autoclave under pressure and temperature: extremely torsion-resistant, vibration-damping and thin-walled with maximum breaking load.

2. 3D-printed carbon center part (Cerakote H-112)

The front and rear frames remain the same for each weapon model – only the additively manufactured center part with carbon fiber and Cerakote Cobalt H-112 Coating It is printed exactly for your weapon system and permanently glued (AT 523433 B1).

Technical fields of action

Seven reasons why the FBT UNIC is superior in the field

Each design feature solves a classic problem of conventional wood and injection molding parts.

1Thermal stability

No excuses when it's wet and cold

Wood swells in the rain and shrinks in the heating air. Autoclave carbon remains absolutely dimensionally stable between -40 °C and +80 °C – for constant contact location.

Practical benefits: No controlled shots after weather change

2Weight savings

Ultra-light for hunting and mountain hiking

With a total weight of only about 600 to 650 g, the FBT UNIC often saves more than 500 g compared to a wooden rod. This compensates for the weight of a silencer or auxiliary device.

Practical benefits: Perfect balance despite the silencer

3Running free swing

Torsion-resistant front frame

Cheap plastic shafts bend on the crossbow or pole and press against the running surface. The highly rigid CFK tubular profile remains torsionally rigid.

Practical benefits: Precision even when placing heavy objects

4Surface protection

Cerakote H-Series Sealant

The 3D-printed center part is enhanced with an embedded Cerakote ceramic coating – absolutely resistant to hand sweat, gun oil, and thorns.

Practical benefits: Zero maintenance effort in hunting operations

5System padding Patent

100% carbon & metal plugs

In the 3D-printed center section, high-strength carbon fibers run around the recoil tubes and built-in metal system bushings. Nothing settles, nothing loosens.

Patent application: Austrian patent AT 523433 B1

6Ergonomics of choice 2 Forms

Lochschaft or SuperErgo

Choose between the relaxed UNIC Lochschaft for maximum recoil control when shooting long distances, or the open UNIC SuperErgo for quick repetition in the prone position.

Execution: For right- and left-wingers

7Modular shaft customization & accessory integration

Quickly adjust shaft length, shaft back and two-leg attachment

With the inserted 7 mm spacers, you can quickly adjust the shaft length to the body size. The optional height adjustment of the shaft back brings your Eye Exactly in the optical axis of your DDoptics scope.

Shot pause & recoil vector

The shot lands in the fire. You stay fully in target.

Especially the introduction of force

Classic shafts with a downward bend generate torque: The tip strikes upward. The straight UNIC shaft directs the impulse linearly into the shoulder.

Material acoustic absorption

The carbon matrix absorbs high-frequency impact vibrations much faster than wood or aluminum – tested for impact resistance up to .338 Lapua Magnum.

Weight & shaft length calculators

Set your current shank weight, your caliber group, and the desired spacer spacing.

Previous rifle squad1.150 g
FBT UNIC incl. selected spacers648 g
-502 g
Direct approx. weight savings on the weapon
36.4 cm
Boot length · -32% heel height


Base weight FBT UNIC approx. 630 g (depending on system) plus approx. 18 g per 7 mm spacer. Base length 35.7 cm.

Proven manufactory quality

Four key metrics, four manufacturing steps

From the digital 3D scan of the weapon system to the finely crafted autoclave finish, every FBT UNIC stock is designed for uncompromising hunting practice.

~ 630 g

Ultra-lightweight

Depending on the system configuration, it is one of the lightest carbon chassis on the market.

-40 to +80 °C

Climate Fest

No sources, no evasion, and no relocation of meeting points in the event of extreme weather.

.338 Lapua

Tested by Magnum

Durable even in the toughest hunting and long-range calibers.

90+ models

Drop-in fit

Available for over 90 repeating and folding rifle barrels without any additional work from the barrel maker.

1

3D Systemscan

Accurate digital measurement of the respective weapon and firing system.

2

Endless carbon printing

Additive construction of the central part with continuous carbon fiber strands (AT 523433 B1).

3

Autoclave high pressure

The front and rear sections are cured from prepreg CFRP in an autoclave.

4

Cerakote & Wedding

Ceramic coating of the middle part and high-strength connection for the 3-part unit.

Compatibility & advice at DDoptics

Quickly equip your hunting rifle in just a few minutes.

Remove the system screws, insert the bearing and system into the FBT UNIC carbon shaft, if necessary tighten the torque – done. No resin beds or post-processing required.

  • Blaser R8 (all races), R93, K95
  • Tikka & Sako T3 / T3x, Sako 85, Sako 90, S20
  • Sauer & Mauser Sauer 101 / 202 / 404 / 505, M12 / M18 / M25
  • Steyr, Steel Action & Merkel SM12 / CL II, HS / HM, Helix / K5

A quiver for a whole life as a hunter – in all weather conditions.

FBT Revolution Carbonschäfte View the configurator in the shop Back to the benefits

Sources & technical evidence

  1. Patent document AT 523433 B1 (Austrian Patent Office): „Modularized rifle assembly and manufacturing“ – registered on September 29, 2020, published on August 15, 2021 (Applicant: FBT Fine Ballistic Tools GmbH, Gröbming). Describes separately manufactured, permanently bonded to epoxy Duroplast shank parts (20–80 wt.% carbon fibers) and a central part manufactured using 3D printing.
  2. FBT Fine Ballistic Tools (fbt.shop) & DDoptics.shop Manufacturer's specifications: Five component groups (adjustable shaft cap, 3D middle shaft with Cerakote Cobalt H-112, CFK side plates, universal front shaft, universal rear shaft).
  3. Independent clinical tests & data sheets: all4shooters practical test Steel Action HML with FBT UNIC SuperErgo & Steyr Gams; Savage Arms data sheet Impulse KLYM; Various technical articles and test reports „UNIC Carbonschaft: Aufbau, Material und Patent“.