Available soon: DDoptics riflescope V6 1-6×24 Gen 3 with iFibre

The newly developed DDoptics riflescope V6 1-6×24 Gen 3 with iFibre - it will be even better than the old V6

Report of the predecessor model can be found HERE

Just a few more sleeps and then it's finally time. Finally the legendary Riflescope V6 1-6×24 again, namely as Generation 3 with standard IFiber light point control, fine crosshair ReticleDifferent reticles for riflescopes. DDoptics uses the following 3 reticles for its riflescopes, depending on the target optics: " More info and tactical Reticle adjustment in MRAD (1 cm / click per 100 metres). It will be fully available from mid-February.

The V6 1-6×24 Gen 3 will once again feature a wide angle and extremely wide field of view

An extremely wide Field of visionThe size of the field of view indicates the width of the terrain that can be observed through the binoculars at a distance of 1000 metres. " More info of approx. 40 metres, a 6x zoom for comfortable aiming even at longer distances were already outstanding features of the Target optics V6 1-6×24 for driven hunts and driven hunts. Thanks to the standard built-in, reflection-free and excellently perceptible Glass fibreA state-of-the-art position and movement sensor registers every movement and the position of the optics. A controller interprets this data so that the illuminated dot is there when you need it. " More info Light pointThe choice of reticle and the associated mode of operation of the illuminated dot is of decisive importance when purchasing. " More info including iFibre control The riflescope will provide a high level of safety for rapid target acquisition and fleeting shots - and above all a Extremely long battery life.

Lightning-fast target acquisition with the V6 1-6×24 Gen 3

The Interpupillary distanceThe interpupillary distance is the optimum distance between the eyepiece lens and the pupil of the eye. " More info is around 100 mm, which ensures the use of strong calibres. In addition, the end of the eyepiece is "defused" with a ribbed rubber ring, on which the Dioptre adjustment (-3 to +3) Scale is located. This rubber ring is significantly tapered, which means that the dreaded tunnelling effect does not occur and target acquisition is even faster.

Shot-proof and extremely robust hunting optics

Despite the wide field of view, the fully coated HDX optical sight offers a high-contrast and true-colour image with outstanding edge-to-edge sharpness properties. The optics are completely reflex-free, even when the lens is not used for hunting on the move. unusual backlight or snow light. The Aiming optics V6 1-6×24 Gen 3 is complete WaterproofWith a watertight lens, a clean and dry gas filling in the form of an argon or nitrogen filling creates an "internal climate" that prevents fogging. " More infoprotected against internal fittings and extremely impact and scratch resistant. Your Shot resistanceWhether a target optic is bulletproof is one of the most important criteria when selecting a riflescope - especially for powerful calibres. " More info has also proven itself with magnum calibres. The point of impact shift when changing magnification is negligible (less than 1 cm) compared to hunting use.