Brief overview of the DDoptics V10 4-40x50 DDMP riflescope
Tube: | 34 mm mono tube | Field of vision: m @100m: | 8,8-0,9 m |
Optical system: | 4-40-fold | Interpupillary distanceThe interpupillary distance is the optimum distance between the eyepiece lens and the pupil of the eye. " More info: | 87-101 mm |
LensWhen we talk about the objective lens of binoculars, we mean the front lens. The front lens is the foremost lens of the objective. " More info: | 50 mm | Length: | 371 mm |
ReticleDifferent reticles for riflescopes. DDoptics uses the following 3 reticles for its riflescopes, depending on the target optics: " More info: | TacA | Weight: | 1046 g |
Light pointThe choice of reticle and the associated mode of operation of the illuminated dot is of decisive importance when purchasing. " More info | Standard or iFibreA state-of-the-art position and movement sensor registers every movement and the position of the optics. A controller interprets this data so that the illuminated dot is there when you need it. " More info | Fogging protection: | Nitrogen filling against misting |
Focus/parallax: | Adjustable lens 25-1000 m to infinity | Tightness: | Water and impact resistant |
The 4-40×50 DDMP - V10 | MRAD riflescope from DDoptics - absolute precision at medium distances up to 1000 m and more
The DDoptics ZF 4-40×50 DDMP is the FIRST V10 aiming optics with 10x zoom from DDoptics as a NEXT LEVEL sporty extension to the proven V6 5-30×50 Telescopic sight.
The ultra-modern telescopic sight 4-40×50 DDMP particularly serves the spectrum for Long range sport shooters from 100 m -1000 m. With an enormous Adjustment range from 30 MRAD (29.6) ⇒ 100 MOA1 MOA (one minute of angle or minute of angle) is 1/60th of a degree of angle. " More info can be used on Distances up to 2000 m and more can be shot.
In the range of 100 - 1000 m the 40-fold MagnificationThe magnification of a binocular model is perhaps the most misunderstood feature. High magnification can be useful! " More info fully usable. The entire Adjustment range is used with only 3 turns This makes it possible to change a wide range of distances extremely quickly.
Small restriction for shooting distances over 1000 m: Due to the trajectory altitude correction, the Reticle adjustment up to the outermost edge area can be adjusted.
In this peripheral area of the optics, the Resolution of the riflescope no longer high enough for technical reasons to realise a 40x magnification. Here, the magnification must be Shooting reduced to 20x become.
All normal in Europe sporty conditional Shooting rangeswhere the reticle is more likely to be in the centre area of the field of view allow an image resolution of up to 40x.
Special features DDoptics riflescope
⇒ DDMP - DDoptics Match Precision
⇒ Perfect for the discerning marksman
⇒ 30 MRAD adjustment range enables extreme long shots
⇒ Robust 34mm tube
⇒ Large tactical metal turrets (no plastic)
⇒ Double scaling (double turn)
⇒ Internal zero stop for ASV (zero stop)
⇒ Hard tactical 0.1 MRAD click detent (1cm/click)
⇒ One revolution = 10 MRAD
⇒ New tacA reticle in the 1st image planeWhen the reticle is in the 1st focal plane, the reticle simply enlarges with the magnification adjustment. " More info
⇒ Powerful parallax levelling with 25-1000-∞
Reticle TacA 2.ffp in the second image plane
The TacA is extremely easy to use. Due to the second image plane at 10x magnification, the "reticle line spacing" corresponds to the distance of Full stroke to full stroke always accurate 1 MRAD ⇒ 10 cm per 100 m. The Intermediate lines are accordingly responsible for 0.5 MRAD ⇒ 5 cm per 100 m and the small dashes 0.1 MRAD ⇒ 1 cm per 100 m.
The arrow-shaped tapered beams were deliberately Transparent designed, so that also Nothing hidden behind the reticle remains.

DDoptics V10 riflescope 4-40×50 DDMP: Stepless illuminated dot from daylight to night vision mode
The Light unit of the TacA is a perfectly balanced system with maximum dynamics. The first brightness levels only an extremely small light spot to recognise.
This can even be dimmed to such an extent that this also with a night vision device can be used. If the light point is turned up further, then Illuminates from a certain light intensity the Whole ballistic reticle with.
Depending on the application can be selected between the pure dot or the fully illuminated reticle. Automatic switch-off with intelligent control can also be selected for this optical sight.
DDoptics V10 riflescope 4-40×50 DDMP - Accurate, internal Zerostop

After removing the Turret caps from the reticle adjustment of the 4-40×50 the tower can be by loosening 3 grub screws remove upwards. Underneath you will find the Zerostop in the form of a round, black disc.
The Zerostop is adjusted after firing by loosening the (also) 3 grub screws on the Zerostop disc.
When loose, the disc can be turned to the stop without any effect and then fixed again with the grub screws become.
You can see the stop on the picture between the target and the optical sight. Then the Replace the tower in the zero position and lock it in place using the 3 grub screws. The Zerostop now stops precisely at the distance you have set.
Reviews
There are no reviews yet.